Recent News containing 'emi'



  • Texim EuropeCOVID-19
  • Fortunately, COVID illness cases in Europe have decreased to a number where any still existing government measures only have limited impact on the Electronics industry. Although in other parts of the World COVID measures can still influence supply chains, other World-wide geopolitical and economic developments currently have a much stronger influence. The result is that product lead times remain exceptionally long and unreliable. Prices change (increase) very often, including on confirmed orders. We are therefore very grateful to all our customers to trust us source their requirements and will continue to do everything in our power to stay as reliable and pro-active as possible in our confirmations and service levels. We also remain cautious about a potential revival of COVID and are well prepared to take the necessary steps should new measures be announced yet again.

  • Insight SiPBLEWireless CommunicationBluetooth
  • The ISP1507-AL module from Insight SiP is a low cost standalone Bluetooth Low Energy node is a small package (8x8x1mm). This complete BLE & Mesh solution integrates the nRF52810 chip from Nordic Semiconductor, an embedded antenna and an integrated DC/DC converter that includes both radio and synchronization crystals. The module runs the Nordic Bluetooth soft device which supports a full Bluetooth V4.2 stack and is Bluetooth 5.0 ready.

  • GradConnConnectivityCable Assembly

  • Nautilus series from GradConn is a premium range of dust and waterproof coaxial cable assemblies. With IP67 & IP68 ratings, Nautilus products offer protection from moisture and particle ingress, both mated and unmated.

    Working in conjunction with customers this range of waterproof interface connectors is constructed with internal seal and O-Ring, which prevents ingress thru the inner contact and thru the panel. The connectors have been tested to IP6x, IPx7, IPx8 for both 1 and 5 metres underwater, perfect for applications in demanding harsh environments.

    Nautilus connectors available are SMA front and rear mount, RP SMA, TNC, RP-TNC & BNC. Cable assemblies are available for a huge variety of coax connectors, specialising in Micro coax types such as Hirose, Murata & I-Pex.

    The     Nautilus series consists of 8 key connector types, with 17 cable assemblies as standard. In addition, hundreds of different Nautilus cable assemblies can be configured to meet your requirements.


    Applications
    •  Asset tracking
    •  Metering
    •  Agriculture technology
    •  Remote sensing
    •  Security
    •  Rugged hand-helds


  • VARTA MicrobatteryBatteryLithium-ion
  • Next to the CellPac LITE (range of standard Lithium-Ion packs), VARTA Storage GmbH now introduces the CellPac BLOX semi-custom service. CellPac BLOX suits those customers in need of semi-customization and where design-cycles, engineering costs and time to market must be minimized for success. Battery designs are limited in their complexity, but available for nearly no NRE cost and development effort.

  • HAHNInductorPassive PFC
  • One of the most important environmental conditions for the smooth operation of electrical equipment is a reliable quality of supply networks. In view of the increasing network pollution and the necessary reduction to comply with the power network stability, the requirements are to be adapted to device manufacturers to comply with the electromagnetic compatibility.

    As from April 2016 the harmonization of the EU Directive 2004/108/EC towards the new version of the 2014/30/EG will be effective. In order to meet these future requirements on the grid-connected emissions, HAHN already provides an extended mains choke series, which allows you within very short time to optimize the EMC-features of your device, compliant to the new standard specifications.

    With a power range up to 10A as well as a wide range of inductance values, this series covers completely the range of common household appliances using their typical plug connected load. Through compliance with the standards in relation to the relevant standards EN 61558-2-20 for chokes, EN 62041, as well as the compliance with the glow wire tests of all materials used in accordance with EN 60335-1 and the use of insulation to the insulation class B and F UL 1446, the integration of these components is quick and easy.


    Features
    •  Excellent temperature fluctuation resistance properties
    •  High electrical safety and long service-life features
    •  High voltage resistance to core
    •  Open or vacuum-encapsulated versions
    •  Per item tested quality with certificate
    •  Self-extinguishing cast housing and sealing material
    •  Come with test certifications to ENEC 10-, VDE, UL- and CSA-regulations
    •  According to REACH and RoHs regulations


    Specifications

    BVD EI 306BVD EI 382BVD EI 423BVD EI 482BVD EI 542
    Inductivity1.0 to 20.0mH1.0 to 15.0mH1.0 to 20.0mH1.0 to 20.0mH1.0 to 20.0mH
    Nominal current (max.)5.2A4.7A5.9A8.7A7.7A
    Height (max.) 34.3mm28.6mm38.3mm39mm42.3mm



    Applications
    •  Industrial and household equipment

  • RRC power solutionsBatteryCharger
  • The RRC-SMB-MBC from RRC is a 50W mini desktop battery charger designed to handle the standard battery form factors RRC2040, RRC2040-2, RRC2054, RRC2057 or compatible smart batteries with a similar footprint.

    Equipped with a microchip, smart batteries are able to communicate with the charger and user alike. This battery-controlled charging method makes sense when considering that some packs share the same footprint but contain different chemistries, requiring alternative charge algorithms. With this technology each battery receives the correct charge levels and terminates full-charge with proper detection methods.

    RRC is a worldwide leader in designing and manufacturing battery chargers for medical, industrial, military and consumer applications. Their full line of battery charger designs meets the widest range of requirements, from simple single-cell batteries, to high-powered "smart" batteries.


    RRC now provides the following smart battery desktop chargers:
    RRC-SMB-MBC120x64x43mm (LxWxH)50W for RRC2040, 2040-2, 2054 and 2057
    RRC-SMB-UBC151x90x43mm (LxWxH)65W for RRC2020, 2024, 2040, 2040-2, 2054 and 2057
    RRC-SMB-UBC-DIS151x90x43mm (LxWxH)Discharge* to SoC 30% for RRC2020, 2024, 2040, 2040-2, 2054 and 2057

    *Discharge power is limited to 5W. The discharger will bring back the batteries to ship-mode after discharging.

    Features
    •  50 Watts desktop battery charger for the standard smart battery form factors
    •  Single bay charger
    •  Optimized charging process by using RRC batteries:
           - Higher charging cycles
           - Faster charging
    •  Simple plug and play operation
    •  Input voltage 100 to 240VAC
    •  Charge current up to 4.8A
    •  Approvals: CE / CB / UL / RCM / GOST / EAC / CCC / PSE / KC
    •  Safety Standard IEC 60950
    •   External power supply level VI for worldwide use with new IEC 60320 C5 connector
    •  Country specific AC input cables available (Europe, UK and US versions)


    Applications
    Standard charging station for mobile devices used in medical, industrial and consumer markets.

  • Insight SiPWireless CommunicationBluetooth
  • The ISP1302 from Insight SIP is a smart Bluetooth module based on the nRF51 Bluetooth Low Energy chip from Nordic Semiconductor in an ultra-small LGA package of only 8.0 x 8.0 x 1.0 mm. The module integrates the antenna, the RF matching circuit, all decoupling and load capacitors plus the 16 MHz crystal oscillator. The ISP1302 works as a complete bi-directional transmitter/receiver.

    The Bluetooth module is perfectly suited for devices that requires low power wireless connectivity and low cost. It is designed in accordance with the Bluetooth Smart (low energy) specification contained within v4.1 of the overall Bluetooth specification.

    The ISP1302 has several end applications, the antenna was designed to be compatible with several ground-plane antenna sizes such as USB dongles or cell phones. It illustrates Insight SiP’s expertise in RF & Front End miniaturization and antenna integration.

    The modules are specifically designed for both PC and smart phone peripherals and ultra-low power applications such as sports and wellness sensors.

    Features
    •   Ultra Small size LGA Package 8 x 8 x 1 mm
    •   Based on nRF51 SoC BLE transceiver
    •   32-bit ARM Cortex - M0 CPU
    •   Available with 128 K Flash & 16K SRAM
    •   Antenna and Matching integrated
    •   MCU and radio 16MHz crystal integrated
    •   16 IOs including 5 ADC and 1 analog reference
    •   Supports Bluetooth v4.1
    •   External synchronization 32kHz crystal (optional)
    •   External DC/DC loading circuit connection (optional)
    •   IPv6 Connectivity
    •   Single 1.8 to 3.6 V supply
    •   Temperature -40 to +85 °C


    Applications
    •   High volume BLE applications
    •   Connected sensors for medical devices, healthcare, sports, fitness, industrial
    •   IoT applications, connected objects
    •   Wearable technology
    •   Home automation
    •   Beacons



mastercard paypal ideal
Texim Europe BV: BTW/VAT Registration: NL814671871B01 | Dutch Chamber of Commerce: 08138443
Contact details | Phone
Contact details | E-mail
Website functions