AAEON | UP LoRa gateway

UP LoRa gateway

Once again, the UP Board bridges the gap between makers, innovators and the Internet of Things with the UP LoRa® gateway. This gateway is a combination of an UP board and the IMST LoRa™ concentrator iC880A. By using the LoRa® technology you can deploy thousands of sensors in the radius of kilometers and connect them to the UP LoRa® solution.

The IMST concentrator iC880A is able to receive packets from different end devices send with different spreading factors on up to 8 channels in parallel. Due to the fact that the combination of spreading factors and signal bandwidths results in different data rates, the use of “Dynamic Data-Rate Adaption” becomes possible. This permits distant LoRa™ end nodes to use higher spreading factors with lower data rate and LoRa™ nodes closer to the concentrator to use lower spreading factors and higher data rate. This allows to build easy to handle star or multiple star networks without the need of routers or repeaters.


In combination with the HAL software setting up a complete LoRaWAN™ gateway is easy.

 UP board general features

  • Intel® AtomTM Quad Core x5-Z8350 1.44GHz (up to 1.92GHz)
  • 4GB DDR3 RAM & 64GB flash eMMC 5.0 onboard
  • 4 USB2.0 Port &  1 USB3.0 OTG
  • WiFi 802.11 a/b/g
  • GbE
  • Power input : 5V/3A
  • Operating temperature: 0 to 50°C
  • IP40 protection
  • Supported OS: Linux, Microsoft Windows 10, Android 5.1
  • Dimensions: 130 x 94 x 44mm (w/o antenna)


LoRa specific features

  • Sensitivity -138 dBm
  • Frequency band 868MHz
  • Orthogonal spreading factors
  • SX1301 base band processor
  • Emulates 49 x LoRa demodulators
  • 10 parallel demodulation paths

  • Wireless sensor network
  • Metering
  • IoT

Need samples?

Send us a sample request

Worth reading

Contact details | Phone
Contact details | E-mail
Website functions
Texim Europe COVID-19 statement